Design and Technical Manual

- (01 - 20) -
WALL MOUNTED TYPE ASU9-12RL2 WALL MOUNTED TYPE ASU9-12RL2
4) Auto restart
Enable or disable automatic system restart after a power outage.
(

... Factory setting)
Setting description Function number Setting value

Yes
40
00
No 01
* Auto restart is an emergency function such as for power failure etc.
Do not start and stop the indoor unit by this function in normal operation.
Be sure to operate by the control unit, or external input device.
5) Remote controller signal code
Change the indoor unit Signal Code, depending on the remote controllers.
(

... Factory setting)
Setting description Function number Setting value

A
44
00
B 01
C 02
D 03