User's Manual

Table Of Contents
Wireless LAN
A26391-K140-Z130-1-8N19 English - 13
Scanning for wireless networks
If you frequently change locations, you may want to want to authenticate
through locally available wireless networks that you have not already
configured. To connect to a wireless network that is not yet configured,
follow these steps:
Click on Scan in the Connection window.
Odyssey Client surveys the air waves and displays a list of all wireless
networks that are currently reachable.
i
If you want to make a connection to another access point, you
must select the access point networks tab. If you want to make a
connection to another system, you must select the peer-to-peer
networks tab.
Select the network to which you want to connect, and click OK.
If you have already configured the settings for this network,
Odyssey Client attempts to connect to it using those settings.
If you have not yet configured settings for this network, the
Network Properties window first appears. Specify settings and
click OK.
Odyssey Client attempts to connect to the network.
i
Only those wireless networks for which the administrator has
configured the SSID (network name) as visible are visible
during scanning. If the SSID is not visible, then you must enter
the network from the Networks window.
i
Detailed information on how to secure your Wireless LAN can
be found in the "Wireless LAN" manual on the enclosed CD.
In this documentation, you will also find information on the
technical data as well as the conformity declaration for Europe
(R&TTE).