User's Manual

Wireless LAN
4 A26391-K140-Z130-1-8N19
Installation of Odyssey
The installation software for the Odyssey Client can be found on the
enclosed Drivers CD.
Before you install, please note the following:
• Under Windows 2000 and Windows XP you must have administrator
rights.
Installing Odyssey Client
To install Odyssey Client:
► Connect the WLAN module to a free USB interface on your
computer.
► Start the installation directly from the enclosed Drivers CD.
The installation wizard is run to guide you through the installation process.
On a computer with several user accounts, Odyssey Client is available
following installation of all users. However, the settings for control of the
Odyssey Client operation are user-specific and must be carried out for
each user account individually.
Configure and Enable Wizard
When you install Odyssey Client for the first time, Configure and Enable
Wizard automatically appears following the installation to complete
configuration of and activate Odyssey Client.
If you do not want to carry out the configuration at this time, you can do
this later. Start the Odyssey Client Manager under Start – Programs –
Fujitsu Siemens Computers – Odyssey Client for Fujitsu Siemens Computers –
Odyssey Client Manager for Fujitsu Siemens Computers. Configure and Enable
Odyssey Wizard automatically starts up.