Operating Manual

Important notes Manufacturer's notes
4
A26361-K515-Z100-1-7619
Notes on installing and removing boards
Boards with electrostatic sensitive devices (ESD) may be identified by labels.
When you handle boards fitted with ESDs, you must observe the following points under all
circumstances:
•
You must always discharge yourself (e.g. by touching a grounded object) before working.
•
The equipment and tools you use must be free of static charges.
•
Pull out the power plug before inserting or pulling out boards containing ESDs.
•
Always hold boards with ESDs by their edges.
•
Never touch pins or conductors on boards fitted with ESDs.
Manufacturer's notes
Energy saving
When the PC is delivered, some energy-saving functions are already set (see Technical Manual for
the system board or the manual "BIOS Setup").
•
If you are not using your PC, switch it off.
•
In the
BIOS Setup
you may set further energy-saving functions for the PC (see the Technical
Manual of the system board or in the manual "BIOS Setup").
Energy saving under Windows NT
If the attached monitor and screen controller support power management in accordance with VESA
(DPMS), a screen saver can be used to switch the monitor into power management mode. This
function is dependent on the screen controller and screen driver used.
Energy saving under Windows 9x
Using the
DeskLock
program you can lock the mouse and keyboard so that no input can be made. If
the attached monitor supports power management in accordance with VESA (DPMS), it can be
switched into power-saving mode at the same time.
In addition the
Screen Saver
tab allows you to set energy-saving functions for your screen. Select the
following item in the
Start
menu:
Settings - Control Panel - Display - Display Properties - Screen Saver -
Energy saving features of monitor
.
With the default setting
Control Panel - Power - Advanced
additional energy saving features of
Windows 9x are available.