Operating Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparation for use and operation
- Troubleshooting and tips
- Installing new software
- Power-on indicator remains dark after you have switched on your device
- The screen stays blank
- Flickering or drifting stripes on the monitor screen
- No mouse pointer displayed on the screen
- The floppy disk cannot be read or written
- Time and/or date is not correct
- Error messages on the screen
- Restoring the hard disk contents
- Tips
- System expansions
- Technical data
- Index
A26361-K515-Z100-1-7619
39
Technical data
Electrical data
Regulations complied with: EN 60950 / VDE 0805
UL 1950
CSA 22.2 No.950
Protection class: I
Rated voltage range: (selectable) 100 V to 125 V / 200 V to 240 V
Frequency: 50 Hz - 60 Hz
Max. rated current: 100 V - 125 V / 2.0 A
200 V - 240 V / 1.2 A
Maximum power draw in operation:
Minimum power draw in operation:
reduced by Windows 9x
Power management advanced_
Power draw in energy saving mode:
Power draw in the 'ready' status:
< 40 W *)
< 30 W *)
< 25 W *)
< 3 W *)
Dimensions
Width/Depth/Height:
Weight:
190 mm/350 mm/355 mm
ca. 8 kg (78.5 N) in basic configuration
Environmental conditions
Environment class 3K2
Environment class 2K2
DIN IEC 721 part 3-3
DIN IEC 721 part 3-2
Temperature:
•
Operating (3K2)
•
Transport (2K2)
15 °C .... 35 °C
-25 °C .... 60 °C
Condensation in operating must be avoided.
Clearance required to ensure adequate ventilation:
•
left-hand side
•
front
•
rear
min. 200 mm
min. 200 mm
min. 200 mm
*) These values only apply for a SCENIC Edition Mi with the configuration below. When additional
components are incorporated, the power consumption in energy saving mode may exceed the
requirements for the environment symbol ("Blue Angel") (30 W).
Processor ( 512 Kbyte cache):
Main memory:
Floppy disk drive:
Hard disk drive:
Software:
CD-ROM drive
Pentium II MMX at 333 MHz
64 Mbytes
1.44 Mbytes
2.1 Gbyte
Windows 95
Power management - Advanced...
24fold