Operating Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparation for use and operation
- Troubleshooting and tips
- Installing new software
- Power-on indicator remains dark after you have switched on your device
- The screen stays blank
- Flickering or drifting stripes on the monitor screen
- No mouse pointer displayed on the screen
- The floppy disk cannot be read or written
- Time and/or date is not correct
- Error messages on the screen
- Restoring the hard disk contents
- Tips
- System expansions
- Technical data
- Index
Preparation for use and operation Indicators and switches
16
A26361-K515-Z100-1-7619
Indicators and switches
1
2
3
4
5
1 = CD-ROM indicator
2 = Floppy disk indicator
3 = Hard disk indicator
4 = Power-on indicator
5 = ON/OFF switch
1 - CD-ROM indicator
The indicator lights up when the CD-ROM drive of the system unit is accessed. You may only
remove the CD when the indicator is dark.
2 - Floppy disk indicator
The indicator lights up when the floppy disk drive of the system unit is accessed. You may only
remove the floppy disk when the indicator is dark.
3 - Hard disk indicator
The indicator lights up when the hard disk drive of the system unit is accessed.
4 - Power-on indicator
The indicator lights up green when the system unit is switched on.
The indicator lights up orange when the system unit is switched off.
5 - ON/OFF switch
Switches the PC on or off.