User Manual

Installing and removing drives System expansions
A26361-K622-Z100-1-7619 39
Replacing a hard disk drive
Ê Open the system unit (see "Opening the system unit").
Removing the hard disk
Ê Pull the data and the power supply connectors from the hard disk drive.
Ê Carefully tilt the system unit so that you have access to the screws on the underside of the
casing.
Ê Remove the four screws with which the hard disk drive is secured while holding the drive so
that it does not fall into the system unit.
Ê Remove the hard disk drive.
Installing a hard disk drive
Ê Take the new hard disk drive out of its packaging.
Ê Slide the new hard disk drive into its bay.