User Manual

System expansions Installing and removing drives
36 A26361-K622-Z100-1-7619
Changing the floppy disk drive
Ê Open the system unit (see "Opening the system unit").
1
2
3
Ê Pull the data and the power supply connectors from the floppy disk drive (1).
Ê Press on the spring (2) that hold the bracket in place at the top and pull out the bracket (3).
Ê Remove the four screws and push the floppy disk drive out of the bracket.
Ê Take the new floppy disk drive out of its packaging.
Ê Push the floppy disk drive into the bracket and secure it with four screws.