User Manual

Installing and removing drives System expansions
A26361-K622-Z100-1-7619 35
Removing an accessible 5 1/4-inch drive
Ê Open the system unit (see "Opening the system unit").
Ê Pull the data and the power supply connectors from the desired drive.
Ê Press sideways on the two springs that secure the drive in the drive cage.
Ê Pull out the drive.
!
For cooling, protection against fire and in order to comply with EMC regulations, you must
refit the shielding plate.
Ê Mount the shielding plate.
Ê Press the plastic drive cover into the front panel until it snaps in place.
Ê Close the system unit (see "Assembling the system unit").
i
If necessary, you must adapt the entry for the drive in the Setup menu.