User Manual

System expansions Installing a board

32 A26361-K622-Z100-1-7619

Removing a board

Open the system unit (see "Opening the system unit").

Remove the lines connected to the board.

Remove the screw (1).

Remove the board from the system unit (2).

Place the board into an appropriate packaging.

To ensure proper cooling, fire protection and observation of the relevant EMC

(electromagnetic compatibility) regulations, you must mount a rear slot cover plate.

Press the rear slot cover plate into the slot.

Close the system unit (see "Assembling the system unit").

If you have installed or removed a PCI board, check in the BIOS Setup the settings for the

relevant PCI slot. If necessary, change the settings. Further information is provided in the

documentation for the PCI board.