User Manual

Preparation for use and operation Switching the PC on and off
14 A26361-K622-Z100-1-7619
Switching the PC on and off
21
1= Power-onindicator 2= ON/OFFswitch
System unit is ready-to-operate
The power-on indicator (1) glows orange or flashes green/orange. In this mode, you can switch the
system unit on with the ON/OFF switch (2). The exact description of the power-on indicator (1) is
contained in the section "Indicators on the system unit".
System unit is on
The Power-on indicator (1) lights green. The system unit can be switched ready-to-operate with the
ON/OFF switch (2).
Switching on the PC for the first time
If the PC is integrated into a network, the user and server details as well as the network protocol are
required. Contact your network administrator if you have any questions about these details.
When you switch on your PC for the first time the supplied software is set up and configured.
If you require the license number of Windows, you will find it either on a sticker on your PC or
printed on the front cover of the Windows manual provided.
Ê Switch your monitor on.
Ê SwitchthesystemunitonwiththeON/OFFswitch.
The power-on indicator lights green and the PC is started.
i
While the PC boots, the screen remains dark for up to a minute depending on the system
configuration. To see the start-up messages, you can switch off this standard setting in
the BIOS Setup in the Quiet Boot entry.
Ê Adjust the brightness if necessary (see the Operating Manual for the monitor).
Some variants require you to start the software installation by pressing the function key
[F1] .
i
Once the installation has been started the PC must not be switched off.
You should only reboot the PC during installation if you are requested to do so. Otherwise
the installation will be not be performed correctly. If a fault occurs in the installation the
contents of the hard disk must be completely restored.