User Manual
Table Of Contents
- PalmSecure ID Match
- Important notes
- Ports and control elements
- Initial startup
- Using the palm scanner
- Restore factory default settings
- Using the SmartCard reader
- Using the magnetic card reader (optional)
- Using the Security Lock
- Technical data
Technical data
Technical data
PalmSecure ID Match
Electrical data
Processor: ARM Cortex A8 single core
Rated voltage: 12 V
Power consumption Off state: 0.13 W
Networked device in standby 3.8 W (device is
automatically set into this mode after about 5
minutes or less without system activity)
Max. rated current: 0.55 A
Dimensions
Width x Depth x Height: 262 mm x 122.6 mm x 95.3 mm /
10.31 inches x 4.83 inches x 3.75 inches
Weight
In basic configuration: Approx. 0.86 kg / 1.9 lbs
Ambient conditions
Temperature
Operation (3K2) 15 °C to 35 °C /
59 °F to 95 °F
Transportation (2K2) –25 °C to 60 °C /
–13 °F to 140 °F
Clearance required to ensure adequate
ventilation:
Minimum of 200 mm / 7.87 inches on all sides
The formation of condensation is not permitted while the device is in operation!
The data sheet for this device contains further technical data. You can find the data sheet
on the Internet at
http://fujitsu.com/fts/support.
i
27