Operation Manual

2 Safety, precautionary and compliance instructions

Your SCALEO E complies with the relevant safety regulations for IT equipment.

Should you have any questions with regard to whether you can use the SCALEO E

where intended please contact your sales agent or our service department.

Risk of electrocution

• The unit requires a safety-tested power cable which complies with the

regulations of the country of use.

• Check the cables and power plug for signs of damage on a regular basis.

• The SCALEO E may only be connected to a power socket installed in

accordance with regulations.

• You may only operate the SCALEO E if its rated voltage matches the local

mains voltage.

• Safe disconnection from the mains supply is only guaranteed by removing the

power plug from the mains socket. Just because the on/off button is not

illuminated, does not mean that the unit is isolated. Simply switching off the

SCALEO E and add-on devices is not enough.

Risk of explosion

• General warnings:

Your system is equipped with a replaceable lithium battery. The battery may

only be replaced by trained service personnel. Contact our service engineers.

• Electromagnetic compatibility

External units, such as LCD TVs, may only be connected to the interface ports

with screened cables to meet the harmonised standards according to EMC

legislation (Act on the Electromagnetic Compatibility of Equipment).

Computer setup

Do not use any components and modules other than those recommended by the

manufacturer when setting up your SCALEO E. The SCALEO E components have

been functionally and thermally tailored to each other in such a way that enables the

manufacturer to guarantee trouble-free operation. If you have any questions, please

contact your specialist dealer or the hotline.

• Repairs to the SCALEO E may only be carried out by authorised qualified

personnel. Unauthorised opening and incorrect repairs may pose considerable

risk to the user (risk of electric shock or fire).

• Before you change, install or remove any components, disconnect the mains

plug and, if applicable, detach the telephone cable from the SCALEO E (pull out

the plug).

• The proper operation (according to IEC 60950/EN 60950) of the SCALEO E is

only guaranteed with a fully attached housing and covers for installation slots

(electrical shock, cooling, fire prevention, noise suppression).

• The SCALEO E may only be opened by authorised and qualified personnel.

bostext