Operation Manual

.com
3 Startup
17
Digital audio connection
► Connect the DIGITAL AUDIO OUT connection and the corresponding digital
AUDIO IN connection of the audio amplifier with a coaxial cable.
► Connect the optical DIGITAL AUDIO OUT connection and the corresponding
digital AUDIO IN connection of the audio amplifier with an optical fibre cable.
3.2.6 Connecting additional devices e.g. printer
You have four USB ports available for connecting additional devices. Additional
USB devices such as printers, external hard drives (Storagebird), Memory Stick,
etc. can be connected here.
3.2.7 Connecting the power cable
Before switching on the SCALEO E, connect all peripheral devices (e.g. TV,
printer). Please take note of the information in the "Connections" chapters when
doing this.
► First connect the power cable supplied to the power socket on the SCALEO E
and then plug it into a mains power socket installed in accordance with the
regulations and with a rated voltage range corresponding to the specification
on the label on the rear of the device.
Power-saving tips
We recommend connecting the system and the peripherals to a standard switchable
plug strip. This makes disconnecting the entire system from the mains easier, safer
and clearer.
Computer systems and their peripherals that do not have a mains switch and are
connected to the mains are in "Standby" mode. Power consumption is inevitable in
this mode. In "Standby" mode the system will maintain certain functions, e.g. wake
on LAN. To isolate the system you must either disconnect the mains plug or switch
the system off at a plug strip.
Please note that the manufacturers of some peripheral devices (e.g. some printers)
do not recommend turning off the mains voltage.
3.2.8 Connecting additional devices
Your SCALEO E has a number of connections, both on the front and rear, to which
additional devices may be connected.
Connecting devices to SCART AUX connection (Loop through)
We recommend that additional devices such as a DVD player or video recorder for
playback or recording be connected directly to the TV.
If your TV has no free SCART connection, you can connect a conventional DVD
player or video recorder to the AUX connection of your SCALEO E.
Note: The SCALEO E must be in Hibernate mode or switched off in order for you to
view films on the connected device. The plug must not be removed!
bostext