Operation Manual

.com
3 Startup
9
3.1.3 Multicard reader
Your SCALEO E is equipped with a multicard reader on the front. The multicard
reader can be used to read and write to memory cards of different types.
The following cards are supported: CompactFlash I/II, IBM Micro Drive,
SmartMedia, MultiMedia, Secure Digital, Memory Stick, Memory Stick Pro, xD.
IMPORTANT!
If the access display (LED) is illuminated, please do not remove a memory medium
as data loss may occur and the memory medium may be irreversibly damaged.
Disconnect the drive in the operating system by right-clicking on the drive and
selecting the Eject menu item.
Information on handling memory cards:
• Memory sticks and SD cards are inserted into the memory slot with the contacts
facing downwards.
• The SmartMedia card is inserted in the slot with the contacts facing upwards.
• With CompactFlash and Microdrive, please note that these should be inserted
in the corresponding slot with the contacts facing forwards and the type label
upwards.
IMPORTANT!
Do not use force, for the memory media can be easily inserted in and also removed
from the intended slot.
3.1.4 Remote control
A remote control is available for operating the unit. Information on how to operate
the SCALEO E with the remote control can be found in the Microsoft
®
Windows XP
Media Center Edition operating instructions.
bostext