Operation Manual

312
12040003 File already existed, so data
could not be saved.
To overwrite the existing file, on the
"Save" screen, set "Overwrite old files?" as
"Yes", and try again.
12040005 Network is busy. Try again
later.
Try again later.
12040006 User name or password may be
incorrect.
Re-enter the user name and password.
12040007 Not connected to the network. Check that the system network is
functioning normally by performing a ping
test from another machine in the network,
other than the server with network folder.
If the system network is not operating
correctly, refer to "Failure to connect to a
remote computer using its server name"
(page 244) for further solutions.
12040008 Scan&Buffer job is already
queued on the computer that
owns the specified network
folder.
Try the following:
• Select a different network folder.
• Wait a short time, then try again.
12040009 Insufficient free space in the
designated network folder.
Ensure the free space requirements are
met, and try again.
1204000A Number of network path
connections has reached the
maximum allowed. No more
may be specified.
Close unneeded network connections, then
try specifying the desired network path
again.
1204000B File targeted for overwriting
may already be in use.
Check that the file to be overwritten is
closed, and try again.
1204000C Specified user is no longer able
to login to this network folder.
Try the following:
• Login with a different account.
• Contact a network administrator to have
the account validated.
1204000D Specified password is no longer
valid for this network folder.
Try the following:
• Login with a different account.
• Contact a network administrator to have
the password validated again.
Code Message Action