Operation Manual

Network Scanner fi-6000NS Operator's Guide 307
C
■ Error
Code Message Action
100B0001 Network is busy. Try again
later.
Wait for a while, and try again.
11080001 Number of user data stores has
reached the maximum allowed.
New users may not login until
the old user data stores are
deleted.
To have the user data store cleared, contact
a system administrator.
Clearing the user data store is not an
undoable action.
"Clearing the User Data Store" (page 114)
11090001 Application could not be
started. System restored to last
known good state. Contact a
system administrator.
System or user settings were restored at
system restart.
Contact a system administrator.
The administrator should check the restored
system or user settings.
110B0001 Search has timed out. Contact a
system administrator.
Contact a system administrator to check
the time of the search timeout.
"3.6.5 Setting the LDAP Server" (page 64)
110B0004 LDAP server is busy. Try the following checks or solutions:
• Contact a system administrator to have
the network settings checked.
"6.3 Network Connection
Troubleshooting" (page 234)
• Contact a system administrator to have
the server status checked.
110B0100 LDAP server response error. Contact a system administrator to check
whether the LDAP server is available.
110D0002 Cannot connect to the LDAP
server.
Try the following:
• The network settings may not be valid.
Contact a system administrator to have
the network settings checked.
"6.3 Network Connection
Troubleshooting" (page 234)
• The server is not working. Contact a
system administrator to have the server
status checked.
110D0005 Number of network path
connections has reached the
maximum allowed. No more
may be specified.
Close unneeded network connections, then
try specifying the desired network path
again.