Operation Manual

Network Scanner fi-6000NS Operator's Guide 283
C
System
Settings File
Backup data could not be restored.
Specified file contains unsupported
data.
Versions do not match between the
backup device and restoring
device.
Update the restoring device.
"3.9.3 Updating the Scanner's
System Software" (page 124)
System settings were successfully
restored. The scanner will be restarted.
No action required.
System Update Maximum file path length is 253
characters.
Set a file path that is no longer
than 253 characters long.
Specified system update contents are
invalid.
Check the contents of the specified
system update.
Specified update file could not be
uploaded, or is not a valid system
update.
Try the following:
• Check if the specified update
file is correct, and try again.
• Specified update file may not be
uploaded because of network
error. Check the network status.
This system update has already been
applied.
System Version x.x.x.x
No action required.
The system needs to be restarted to
finalize the update. OK to update
now?
OK: update and restart immediately.
Web-login will not be possible until
the restart completes.
Cancel: return to the Update screen
without updating.
Press the [OK] button to update
the system now.
Otherwise, press the [Cancel]
button.
System update has completed and
scanner is being restarted.
Web-login will not be possible until
the restart completes.
No action required.
Technical
Support
Information output level has not been
set.
Enter an information output level.
Screen Message Action