Operation Manual

Network Scanner fi-6000NS Operator's Guide 281
C
User Data
Store
Maximum file path length is 253
characters.
File path is too long.
Set a file path that is no longer
than 253 characters long.
Specified user data store contents are
invalid.
Check the contents of the specified
user data store file.
OK to overwrite the current user data
store?
To restore data, press the [Yes]
button. Otherwise, press the [No]
button.
Specified backup file could not be
uploaded, or is not a valid user data
store.
Try the following:
• Check if the specified backup
file is correct.
• Try restoring the file again.
• Specified backup file may not
be uploaded because of network
error. Check the network status.
Restoring from the specified backup
file will cause the maximum number
of user data stores to be exceeded.
Clear the existing user data stores, and
try again.
Up to 1,000 users can be
registered. Clear the existing user
data stores, and try again.
"Restoring the User Data Store"
(page 111)
User data could not be restored.
Specified file contains unsupported
data.
Versions do not match between the
backup device and restoring
device.
Update the restoring device.
"3.9.3 Updating the Scanner's
System Software" (page 124)
User data store was successfully
restored.
No action required.
Screen Message Action