Operation Manual

Network Scanner fi-6000NS Operator's Guide 279
C
Alert
Notification
Alert notification address contains
invalid characters.
Enter a valid alert notification
address.
Notification e-mail address has not
been entered.
Enter a notification e-mail address,
and then send a test mail.
Test e-mail could not be sent because
a SMTP server has not been set yet.
Set a SMTP server and try again.
Test e-mail could not be sent. Try the following:
• Check if the computer
connected to the SMTP server is
running properly.
• Check if an e-mail can be sent
to the address from another
personal computer in the
network.
• By performing a ping test,
check if the SMTP server or the
network connection to the
SMTP server is working
properly. If there is no response
from the SMTP server ping test,
check that the system network is
functioning normally by
performing an SMTP server
ping test from another machine
in the network.
• If the system network is not
operating correctly, refer to
"Failure to connect to a
remote computer using its
IP address" (page 242) for
further solutions.
• If the only the SMTP server
cannot connect to the
network, request the
network administrator to
check that the SMTP server
and the network connection
to the server are
functioning normally.
Screen Message Action