Operation Manual

Network Scanner fi-6000NS Operator's Guide 277
C
Network
Folder
Specified network folder alias
contains invalid characters.
Enter a valid network folder alias
name.
Specified network folder alias is
already being used. Try a different
alias.
Rename the network folder whose
alias is already being used, and try
adding the folder again.
OK to remove this network folder
from the list?
To remove the network folder,
press the [OK] button.
Otherwise, press the [Cancel]
button.
A single user is not allowed to connect
to this network folder from multiple
devices. Close all other connections to
this folder and try again.
Close all other connections to this
folder and try again.
Access was refused. Contact a server administrator to
find out if an access permit has
been set.
Cannot find the network folder path. Contact a server administrator.
Operation not possible. Network path
is not working.
Contact a server administrator.
Not connected to the network. Check that the system network is
functioning normally by
performing a ping test from
another machine in the network,
other than the server with network
folder. If the system network is not
operating correctly, refer to
"Failure to connect to a remote
computer using its IP address"
(page 242) for further solutions.
Too many network connections. To
continue, close any unused network
connections, and try again.
Close unneeded network
connections, then try opening the
desired network connection again.
Network is busy. Try again later. Wait for a while, and try again.
Number of network path connections
has reached the maximum allowed. No
more may be specified.
Close unneeded network
connections, then try specifying
the desired network path again.
Screen Message Action