Operation Manual

5.2 Cleaning the ADF
Network Scanner fi-6000NS Operator's Guide 211
Scanner Care
5
5.2 Cleaning the ADF
The ADF should be cleaned after approximately every 1,000 scanned sheets. However, this criteria
varies according to the type of documents scanned. For example, it may be necessary to clean the
ADF more frequently when documents with insufficiently fused toner are scanned.
5.2.1 Cleaning the ADF
1. Push the ADF release button, then hold both sides of the top cover and lift it open.
The glass scanner windows inside the ADF can become hot when the
scanner is used.
Before cleaning the inside of the scanner, disconnect the AC adapter
from the power outlet, and wait for at least 15 minutes to let the glass
scanner windows cool down.
Be careful that the top cover does not shut on your
fingers.