Operation Manual

194
3. Select whether or not automatic page orientation is required.
⇒ This returns you to the "Scan Settings" screen. The selected setting is displayed to the
right of the [Page Orientation] button.
4.7.12 Blank Page Skip
The scan process can be set to skip any blank pages in the scanned document.
For example, when a stack of documents containing both two-sided and one-sided documents is
scanned in duplex scan mode, this feature removes only the reverse side (i.e. blank page) of one-
sided documents from the scanned data.
HINT
Irrespective of what page orientation is decided, pages may still be
manually rotated as desired in the "Scan Viewer" screen.
For more details about the "Scan Viewer" screen, refer to "4.9 Editing the
Scanned Data in the Scan Viewer" (page 201).
ATTENTION
• If the Brightness setting (see "4.7.9 Brightness" (page 191)) is set to [Dark]
or [Medium Dark], blank pages may not be recognized as such by the
scanner.
• No scanned data is produced if all of the sheets in the document stack are
recognized as blank pages.
• The following types of documents may be accidentally recognized as blank
pages.
Before discarding the scanned documents, check for pages accidentally
removed from the scanned data. If any pages have been removed, the
document may need to be re-scanned.
• Almost blank pages containing only a few characters
• Page of only one color (including black), without any patterns, lines, or
characters.