Operation Manual

Preparing your notebook for use
Switching on the AM ILO Mini for the first time
Switchingonforthefirst time
The device must be supplied with power through the mains adapter during this process.
When you s witch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using th e mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
You can find information o n how to restore the operating system, drivers, manuals
and special software in the "Recovery Process" manual.
To m ake it easier to use your de
vice for the first time, the operating system
is pre-installed on the hard d
isk.
► Switch on your AMILO Mini (1
).
► During installation, follow the instructions on screen.

Consult t he operating s ystem manual if anything is unclear about the requested input data.
If a W indows operating system is installed on your device, you will find more
information on the system and drivers, help programmes, updates, manuals etc. on
the device or on the Internet under "
www.fujitsu-siemen s.com/support" .
10 AMILO Mini Operating Manual, edition 2