Operating Manual Professional PC X103 SFF

System expansions
32 VFY-SCED103S, edition 1
Removing and installing accessible drives
► Open the casing (see "Opening the casing").
► Remove the drive cage (see "Removing the drive cage").
1
1
1
1
1
1
1
1
1 = Floppy Disk Drive 2 = Optical drive
► Remove the four screws (1) on the underside of the drive cage.
► Pull the drive from the front out of the drive cage.
► Slide the new drive into the drive cage.
► Fasten the screws (1).
► Install the drive cage (see "Installing the drive cage").
► Close the casing (see "Closing the casing").
Installing and removing the hard disk
► Open the casing (see "Opening the casing").
► Remove the drive cage (see "Removing the drive cage").
1
1
2
► Remove the two screws (1).
► Push the hard drive mount as far as it will
go in the direction indicated by the
arrow (2) and take it out of the casing.
► Disconnect the cables from the hard disk.