KVM Switch User Guide 2-1611

Operations
be accessed without rst entering a password.
4.10.2.3.1 Activating security
Select the Set/Change Password menu option. You will be prompted with the
option to continue. Enter a Y .
Type a password for this KVM s2-1611 and press Enter. This password must
be a minimum of 5 characters and can be up to a maximum of 12 characters
(10 are visible). The password must consist of a combination of alpha and
numeric characters.
You will be prompted to re-type the password. Once you complete this step,
security will be active and you will not be able to access KVM s2-1611 termi-
nal operations without the password.
4.10.2.3.2 Changing the password
Select the Set/Change Password menu option.
You will be prompted to type the old password and a new one.
Re-enter the new password to verify.
This password places your KVM s2-1611 terminal in a secure mode. This pass-
word should be guarded like any network password and care should be taken to
avoid forgetting or misplacing it. There are no means for recovering a lost pass-
word.
4.10.2.4 Exit
This menu selection will return you to the ready prompt.
Exit
38 590-332-501E