KVM Switch User Guide 2-1611

KVM series2-1611

Attach one end of the CAT 5 cabling that will run between your KVM s2-Adapt-

er and unit to the RJ45 connector on the KVM s2-Adapter.

Connect the other end of the CAT 5 cable to the desired Rack Interface (RI)

port on the back of your KVM s2-1611 unit.

Repeat steps 2-4 for all servers you wish to attach.

When connecting a Sun KVM s2-Adapter, you must use a multi-sync monitor

to accommodate Sun computers that support both VGA and sync-on-green

or composite sync.

3.3.5 Adding a KVM switch

You can add your cascade switches to the KVM s2-1611 system for better inte-

gration into your existing conguration. In a cascaded system, each RI port will

accommodate up to 24 servers.

Figure 4: KVM s2-1611 Conguration with a Cascaded KVM Switch

Connecting an Adapter to each server

1 3 5 7 9 11 13 15

2 4 6 8 10 12 14 16

KVM s2-1611

Appliance

KVM s2-Adapter

PS/2, USB and Sun cables

are available

Tiered KVM s2 Appliance

Cascade to a KVM s2-1611, 1602

or 0801 via a CAT 5 cable con-

nected from an RI port to the ACI

port on the KVM s2-1602

Cascaded

KVM Switch

Local Analog

User

Server 1

12 590-332-501E

KVM s2-1602 Appliance

KVM s2-Adapter