KVM Switch User Guide 2-1611

KVM series2-1611
3.3.1 Installing the KVM series2-1611 hardware
Connect a terminal or PC running terminal emulation software (such as
HyperTerminal) to the conguration port on the back panel of the appliance
using a RS232 DB9 null modem cable. The terminal should be set to 9600
baud, 8 bits, 1 stop bit, no parity and no ow control.
Plug the supplied power cord into the back of the appliance and then into an
appropriate power source.
When you turn on the power, the Power indicator on the front of the unit will
blink for 30 seconds while performing a self-test. Approximately 10 seconds
after it stops blinking, press the Enter key to access the main menu.
3.3.2 Conguring the KVM series2-1611 hardware
You will see the Terminal Applications menu with six options. Select option 1,
Network Conguration.
Figure 3: Network Conguration Menu
Select option 1 to set your network speed. When possible, you should set
your connection manually without relying on the auto negotiate feature. Once
Installing/Conguring the KVM s2-1611
10 590-332-501E