- Fujitsu Siemens Servers Dynamic Reconfiguration (DR) User's Guide

xiv SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007
Audience
This manual is intended for users, who administrate SPARC Enterprise
M4000/M5000/M8000/M9000 servers (hereinafter referenced to as XSCF user). The
XSCF user is required to have the following knowledge:
■ Solaris
TM
Operating System and Unix command
■ SPARC Enterprise M4000/M5000/M8000/M9000 servers and basic knowledge of
XSCF
Structure and Contents of This Manual
This manual is organized as described below:
■ Chapter 1 Overview of Dynamic Reconfiguration
This chapter provides an overview of DR.
■ Chapter 2 What You Must Know Before Using DR
This chapter explains conditions, configuration and checklists related to DR.
■ Chapter 3 DR User Interface
This chapter describes user interfaces of DR.
■ Chapter 4 Practical Examples of DR
This chapter describes sample operations of DR commands provided by DR.
■ Appendix A Message Meaning and Handling
This appendix contains explanations and messages that might be displayed
when DR is used.
■ Appendix B Example: Confirm Swap Space Size
This appendix explains how to confirm whether the system has enough swap
space for operating the DR function.