User's Manual

ManualsBrandsFujitsu Siemens Computers ManualsNetwork HardwareFujitsu Siemens Computers Siemens Computers Network Hardware AS x88

A&D SE SP3

Karlsruhe

Product information

x88/TM: Linking PROFIBUS-PA

Var.

V1.01

Issue: July, 2000

Descriptors

TELEPERM M, AS 388/TM, AS 488/TM, PROFIBUS-PA

Summary

This product information refers to the extension software packages:

Name Variant Issue Product no. (MLFB)

Linking

PROFIBUS-PA

to AS x88/TM

(Link and Coupler)

V 1.01 6DS5 130-8AA

Linking

PROFIBUS-PA

to AS x88/TM

(only Coupler)

V 1.01 6DS5 130-8AB

Description:

Ergänzende Systemdoku.

AS x88/TM:

PA-Treiberbausteine

Supplem. System Docu.

AS x88/TM: PA Driver blocks

German

English

Änderungen vorbehalten

Subject to alteration

Sous réserve de modications

Con riserva di modifiche

Summary of content (5 pages)

PAGE 1
s A&D SE SP3 Karlsruhe Product information AS x88/TM: Linking PROFIBUS-PA Var. V1.01 Issue: July, 2000 Descriptors TELEPERM M, AS 388/TM, AS 488/TM, PROFIBUS-PA Summary This product information refers to the extension software packages: Name Variant Issue Product no. (MLFB) Linking PROFIBUS-PA to AS x88/TM (Link and Coupler) V 1.01 6DS5 130-8AA Linking PROFIBUS-PA to AS x88/TM (only Coupler) V 1.01 6DS5 130-8AB Description: Ergänzende Systemdoku. AS x88/TM: Supplem. System Docu.
PAGE 2
Product information AS x88/TM: Linking PROFIBUS-PA 1 July, 2000 About this Product The product information on system software M02.00 / M02.01 remains valid. The following information represents a supplement for the add-on function package "Linking PROFIBUS PA to AS x88/TM". Caution: The system requires AS software version ≥ M02.00 ! In the case of non-compliance, the add-on function package PA Drivers V1.01 cannot operate.
PAGE 3
Product information AS x88/TM: Linking PROFIBUS-PA July, 2000 1.1 Extending Documentation The included product diskette contains all current information which can help you in commissioning the PA Drivers for the AS x88/TM. This information is included in this product information and in the file: A:\DOKU\PA_BST_E.
PAGE 4
Product information AS x88/TM: Linking PROFIBUS-PA July, 2000 The contents of the file PA_TREIB.INI must be entered before line "EATASK.386" in the file STARTER.INI, contained on the memory card. The modified file STARTER.INI must then be copied to the memory card again. For using the PROFIBUS-PA connection, two modules of the AS x88/TM system software M02.00 have to be changed. For that copy the three files from the directory A:\M02_00.
PAGE 5
Product information AS x88/TM: Linking PROFIBUS-PA July, 2000 2.2.2 Installation with Programming Unit PG740 Before starting the installation activity, please make sure (before withdraw the memory card) an archive exists for the current custom plant and the files to be changed. This will allow to restore the previous software version in the case that unexpected problems occur. Stop the AS, e.g. with STO. Then, switch the AS OFF before withdrawing the memory card! Copy the files listed under 2.2.