System configurator and order-information guide Hub Switch RX600 S3
System configurator and order-information guide
Start PRIMERGY RX600 S3
PRIMERGY RX600 S3 Status 2007-01-24
Section
I
Basic unit
PRIMERGY RX600 S3
SCSI
PRIMERGY RX600 S3
SAS
Rack unit 4U Rack unit 4U
SCSI
basic unit with:
SAS
basic unit with:
Basic Unit including:
- 2 hot-plug power supply (redundant)
- 3 + 2 bays for 1" HDD`s (two channels) - 8 bays for 2.5" SAS HDD`s - 2 hot-plug fan modules (redundant)
- LCD-Display for LocalView (Service Display)
-
7
PCI Slots
-
6
PCI Slots
- 1 bay (0,5" height) for CD- or DVD-ROM
- 1x 64bit / 133MHz PCI-X slot (hot plug) - 1x 64bit / 133MHz PCI-X slot (hot plug) - 1x 5.25" bays FH (1,6" high) for accessible drives
- 2x 64bit / 100MHz PCI-X slot - 2x 64bit / 100MHz PCI-X slot - Rack- mounting kit
-
3x
PCIe x4 slot (hot plug)
-
2x
PCIe x4 slot (hot plug)
- 1x PCIe x8 slot (hot plug) - 1x PCIe x8 slot (hot plug) Systemboard with
- Intel E8501 chipset with 800MHz Frontside Bus
- onboard RAID 5 functionality - SAS RAID 5 Controller - 1x XEON MP dua core processor
with 256MB Cache (BBU optional) with 256MB Cache and BBU (2nd, 3rd and 4th as option)
- 1 memory board (2nd, 3rd and 4th as option)
- Ultra 320 SCSI-controller (LSI 53C1030)
- memory of basic units selectable via - memory of basic units selectable via - Dual LAN-Controller 1GBit on-board
base memory order codes base memory order codes WOL-capable (BroadCom 5704)
2.60GHz/4MB 7110M S26361-K988-V410 2.60GHz/4MB 7110M S26361-K988-V510 - VGA Controller on-board
3.00GHz/4MB 7120M S26361-K988-V420 3.00GHz/4MB 7120M S26361-K988-V520 (ATI Radeon 7000M, 16MB RAM)
3.20GHz/8MB 7130M S26361-K988-V430 3.20GHz/8MB 7130M S26361-K988-V530 - Server Management Controller on-board
3.40GHz/16MB 7140M S26361-K988-V440 3.40GHz/16MB 7140M S26361-K988-V540 (RSB 2 Board optional)
- ServerView Suite Software package
incl. ServerStart, ServerBooks,
Management Software and Updates
PRIMERGY PRIMECENTER- Rack - Interfaces:
Front side
3x USB 2.0
SNP:SY-F1647E301-P 1x VGA (15 pin)
Installation ex works for one "Rack-mounting ex factory"
server or subsystem. This service is to be ordered once Rear Side
Hereby the rack will be delivered per installable server/storage 2x USB 2.0
completely pre-mounted and subsystem, in order to get the 1x VGA (15 pin)
all wired connections are tested. server/storage subsystem 1x RS-232-C (serial, 9 pin)
With racks 12U, 24U, 38U: mounted into the PRIMERGY racks. 2x RJ45 (on board LAN)
Systems and components In case of the 46 U PRIMERGY rack, no PS/2 connection for KB / Mouse
will be delivered installed in the rack this service has to be ordered, (USB connectivity must be used instead)
With racks 46U: to get the mounting kits and the
Systems and components cables installed
will be delivered separately
To be ordered only together with
a PRIMERGY- Rack Mounting kit is part of the basic unit PRIMERGY RX600 S2
PRIMECENTER rack - 1 pair of telescopic rails (713 - 812mm)
e.g.: - 1 bracket DC-PC-Rack
S26361-K826-V10x - 1 cable management for DC-PC-racks
refer configurator DC-Rack This kit allows for mounting of TX/RX600 S3 in in FSC 19" DataCenter- and
max. 1x per System
PRIMECENTER- racks and all server racks conforming to EIA standard EIA-310-D for 19" racks.
Therefore the mounting kit is variable in depth from 713 - 812mm
Installation in PRIMERGY 19" Classic rack is not possible.
Due to the heat dissipation of the system, sufficent cooling couldn´t be enabled in classic rack.
Connetion for KVM switch / Rack console
- RC23 can be directly connected (both USB and PS/2 connections)
- KVM S2 series needs the KVM S2 Adapter USB<->VGA
- For ES4/8+ KVM series with PS/2 connector as well as for standard PS/2 KB / Mouse
an additional USB to PS/2 adapter must be bought additionally and connected to the RX600 S3.
The adapter offers 2x PS/2 ports.
Adaper order number, to purchase via PRIMEPOWER, is:
D:GP70P-KA01 Adapter for PS/2<->USB
- Appropriate FSC USB keyboard is S26381-K340-V1*
This keyboard also needs USB cable T26139-Y3812-V1
A
Fujitsu Siemens Computers Enterprise Products PRIMERGY Server 6 of 17