PRIMERGY RX600 S3 incl.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/System-Architect Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system. You can configure your individual PRIMERGY server in order to adjust your specific requirements.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 Configuration diagram PRIMERGY RX600 S3 TOP View Slot System unit ( I ) Extension slots SCSI / RAID controller ( VIII ) Fiber Channel ( IX ) Communication/Network ( X ) 7 6 5 Memory ( III ) Memory Board A (2 Banks / 4 modules) PCI-X 64-Bit / 100MHz, long Memory Board B (2 Banks / 4 modules) PCI-X 64-Bit / 100MHz, long Memory Board C (2 Banks / 4 modules) PCI-Express x4 ( hot-plug ) Memory Board D (2 Banks / 4 m
PRIMERGY-Software Configurators and Release Lists PRIMERGY RX600 S3 Status 2007-01-24 Start "PRIMERGY RX600 S3" SW - Configurator 32 bit with OEM-Software for PRIMERGY Server Usage of OEM SW from MS is not possible under VMware without OEM-Software for PRIMERGY Server OEM-SW is bound to HW and is not allowed to be ordered separately.
PRIMERGY-Software Configurators and Release Lists PRIMERGY RX600 S3 Status 2007-01-24 Start "PRIMERGY RX600 S3" SW Configurator EM64T with OEM-Software for PRIMERGY Server Usage of OEM SW from MS is not possible under VMware without OEM-Software for PRIMERGY Server OEM-SW is bound to HW and is not allowed to be ordered separately.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 Start PRIMERGY RX600 S3 I Section Basic unit PRIMERGY RX600 S3 SCSI PRIMERGY RX600 S3 SAS Rack unit 4U Rack unit 4U SCSI basic unit with: SAS basic unit with: - 3 + 2 bays for 1" HDD`s (two channels) - 8 bays for 2.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 A II Section Processor A 4-way processor system requires a multi-processor operating system Later upgrading to a four-way-processor system is also possible VRM´s for 1st/2nd CPU are on the Motherboard, for the 3nd / 4th CPU addition VRM Modules are required. Extension CPUs must have identical cache size and clock rate 2. CPU S26361-F3124-E410 Xeon MP 7110M 2.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 B III Section Memory The system can be equipped with up 4 memory boards with 2 memory banks each. One Memory Board is allready supplied in the base unit. Each memory board can be equipped with up to 2x 8GB = 16GB memory. The maximal extension is 64GB with 4GB modules! No mix of modules within one memory bank is allowed.
System configurator and order-information guide PRIMERGY RX600 S3 SAS Status 2006-12-31 C IV Section on-board SCSI / SAS Controller SCSI Base Units The system is equipped with a two channel Utra 320 onboard SCSI controller including a full featured RAID controller with 256MB Cache (suporting the RAID level 0, 1, 5, 10, 50). As option the on-board RAID Controller can be equipped with a Battery Backup Unit.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 D SAS Base Units AB. on-board SCSI-/ SAS RAID-Controller for accessible drives and SAS HDD´s -> SAS Version The system will be delivered with a 8-port SAS RAID controller for the connection of SAS HDD´s This SAS RAID Controller is equipped with 256MB Cache and BBU (suporting the RAID level 0, 1, 5, 10, 50), and can be used only for the connection of internal disks drives.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 E V Section USB devices / optical devices One of the following USB devices must be used for integrating the drivers during installation process if no automized (e.g.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 F VII Section Tapes devices S26361-F3128-E101 internal SCSI-Cable for connetion of internal Tape devices max. 1x per system S26361-F2848-E3 Tape drive DDS Gen5 S26361-F2848-E31 (only for OBDR) DDS-G5 for One buttom dis. recov. 36GB, 3MB/s, U2W SCSI Connector: HD68 without cable incl. description (Ger/US) data and cleaning cartridge 1.6 * 5.25", anthracite bezel max.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 G VIII Section optional SCSI / RAID controller B. SCSI - controller for internal and external devices. S26361-F2399-E1 1-channel SCSI U160 Controller Adaptec 29160 plug: internal: HD 50-pin & HD68 external: HD68 without cable 64/66 PCI 3.3V and 5V tolerant signaling max. 2x per system max.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 H IX Section Fibre channel controller Qlogic controller Emulex Controller No mix and match for Qlogic and Emulex Fibre channel controllers possible S26361-F3097-E1 2GBit/s FC Controller Qlogic QLA2340, full height bracket 1 channel 2GBit/sec FC Controller LC Interface for 50µm Fiber PCI-X 64Bit / 133MHz, 170mm 3.3V / 5V tolerant signaling max. 3x per system Qlogic controller max. 3x or Emulex controller max.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 I X Section Communication / Network on-board LAN Controller Dual Gbit Ethernet Contr. on-board BroadCom BCM5704 ext: 2 x RJ 45 connector Teaming: Failover, Load Balancing The Intel LAN Controllers Pro 1000MT, 1000MF, 1000PT, 1000PF can be used with the on-board controller in Teaming Mode With Broadcom on-board adapters for Gigabit Ethernet must be used for the teaming the Broadcom driver.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 J Section XI System Management Products (RemoteView) S26361-F1790-E221 RemoteView Software V5.0 Installation and configuration of RemoteView Web and LAN FrontEnd RSB, BMC-Manager, RTDS, FreeDOS and online manuals S26361-F2425-E103 RSB S2 LP 3HU RemoteView Service Board S2 Low Profile Version with 3 U bracket for one standard PCI-slot incl. cables and RV SW max.
System configurator and order-information guide PRIMERGY RX600 S3 Status 2007-01-24 Change Report Date Order number Changes 2007-01-24 2007-01-24 2007-01-24 2007-01-16 2007-01-16 2006-12-19 2006-12-14 2006-11-28 2006-11-15 2006-11-15 2006-11-15 2006-11-15 2006-11-15 2006-11-15 2006-11-15 2006-11-15 2006-08-25 2006-08-25 2006-08-25 2006-08-25 2006-08-25 2006-08-25 2006-08-25 2006-08-25 2006-08-25 2006-02-13 S26361-F3124-E200 S26361-F3124-E361 S26361-K988-V122 S26361-F3215-E10 S26361-F3215-E1 S26361-K988
