- Fujitsu Computer Systems Corporation User Guide

- Device Ports

Internal LAN (RJ-45) Jack

The internal LAN (RJ-45) jack is used for a Gigabit (10Base-T/100Base-Tx/1000Base-T) Ethernet LAN

connection. (See Figure 5 for location).You may need to configure your notebook to work with your

particular network. (Please refer to your network administrator for information on your network

configuration.) To connect the LAN cable follow these easy steps:

1 Align the connector with the port opening.

2 Push the connector into the port until it is seated.

3 Plug the other end of the cable into a LAN outlet.

Universal Serial Bus Ports

The Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external game pads,

pointing devices, keyboards and/or speakers. (See Figure 4 for location). There are two USB 2.0 ports on

your notebook, both on the right side.

In order to connect a USB device, align the connector with the port opening, then push the connector into

the port until it is seated.

THE INTERNAL MODEM IS NOT INTENDED FOR USE WITH DIGITAL PBX SYSTEMS. DO NOT CONNECT THE MODEM

TO A DIGITAL PBX AS IT MAY CAUSE SERIOUS DAMAGE TO THE MODEM OR YOUR NOTEBOOK. CONSULT YOUR

PBX MANUFACTURER’S DOCUMENTATION FOR DETAILS. SOME HOTELS HAVE DIGITAL PBX SYSTEMS. BE SURE TO

FIND OUT BEFORE YOU CONNECT YOUR MODEM.

• THE INTERNAL MODEM IS DESIGNED TO THE ITU-T V.90 STANDARD. ITS MAXIMUM SPEED OF 53000BPS IS THE

HIGHEST ALLOWED BY FCC, AND ITS ACTUAL CONNECTION RATE DEPENDS ON THE LINE CONDITIONS. THE

MAXIMUM SPEED IS 33600BPS AT UPLOAD.

• THE INTERNAL MODEM ON ALL LIFEBOOK NOTEBOOKS FROM FUJITSU ARE CERTIFIED FOR USE IN THE UNITED

STATES AND CANADA. THE MODEM MAY BE CERTIFIED IN OTHER COUNTRIES.

DUE TO THE ONGOING CHANGES IN USB TECHNOLOGY AND STANDARDS, NOT ALL USB DEVICES

AND/OR DRIVERS ARE GUARANTEED TO WORK.