- Fujitsu Computer Systems Corporation User Guide

41 - LifeBook Security/Application Panel
Windows Vista:
1 Go to the Start menu.
2 Select All Programs.
3 Select Security Panel Application and Set User Password.
4 Follow instructions to set the user password.
Operating Your LifeBook Security/ Application Panel
The security lock feature is in effect both when the system resumes from Off or Standby state. You always
need to push the Suspend /Resume button to input the user password. Your system will not begin the boot
sequence without entering your supervisor/user password.
From Off State
1 Turn on your system.
2 When the Security Indicator flashes, enter the password and press Enter button.
For example, if the password is 22222, press Button Number 2 five times and press [Enter] button. The LifeBook
notebook will boot to normal operation.
From Standby State
1 Press your Suspend/Resume button.
2 When the Security Indicator flashes, enter the password and press Enter button. The notebook should resume
normal operation.
YOU MAY CHANGE OR REMOVE THE SUPERVISOR OR USER PASSWORD BY REPEATING THE STEPS
DEFINED ABOVE.