- Fujitsu Computer Systems Corporation User Guide

- Restoring Your Pre-installed Software

Restoring Your Pre-installed Software

The Drivers and Applications Restore (DAR) disc contains sets of device drivers and Fujitsu utilities (in

specific directories) that are unique to your computer configuration for use as documented below.

Re-installing Individual Drivers and Applications

The Drivers and Applications CD can be used to selectively re-install drivers and/or applications that may

have been uninstalled or corrupted.

To re-install drivers and/or applications:

1 Boot up the system and insert the DAR CD after Windows has started. A Fujitsu Installer screen is displayed

after the CD is inserted.

2 After reading the License Agreement, click [I agree].

3 A window will appear containing a list of applications, drivers, and utilities that you can install from the Drivers

and Applications CD

• IN ORDER TO INSTALL APPLICATIONS AND/OR DRIVERS FROM THE DAR DISC, YOU WILL NEED TO CONNECT AN

EXTERNAL OPTICAL DRIVE TO YOUR SYSTEM.

• IF YOU HAVE ACCESS TO THE INTERNET, VISIT THE FUJITSU SUPPORT WEBSITE AT

HTTP://WWW.COMPUTERS.US.FUJITSU.COM/SUPPORT TO CHECK FOR THE MOST CURRENT INFORMATION,

DRIVERS AND HINTS ON HOW TO PERFORM RECOVERY AND SYSTEM UPDATES.

THERE MAY BE CERTAIN FREE THIRD-PARTY APPLICATIONS PRE-INSTALLED ON YOUR SYSTEM THAT

ARE NOT ON THE DAR CD. THE LATEST VERSIONS OF THE APPLICATIONS CAN BE DOWNLOADED FROM

THE THIRD-PARTY’S WEBSITE.