User's Manual

7
Drive1 Submenu of the Main Menu
The Drive1 submenu allows you to configure secondary ATA devices.
Figure 3. Drive1 Submenu
Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu
Menu Field Options Default Description
Type:
■
Auto
■
None
[Auto] NOTE: The Type field does not appear as a drop-down menu. Tap
the spacebar to toggle the selections.
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following setup items do not appear.
Multi-Sector
Transfers:
■
Disabled
■
2 Sectors
■
4 Sectors
■
8 Sectors
■
16 Sectors
[Disabled] This option cannot be changed (automatically identified by the
BIOS). Specifies the number of sectors per block for multiple sector
transfer.
LBA Mode
Control:
■
Disabled
■
Enabled
[Disabled] Enables or disables Logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed (automati-
cally identified by the BIOS).
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Main
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Drive1 [MATSHITADVD-RAM UJ-841S]
Type: [Auto]
Multi-Sector Transfers: [Disabled]
LBA Mode Control: [Disabled]
Transfer Mode: [Standard]
Ultra DMA Mode: [Disabled]
▲
Main Menu