- Fujitsu Siemens Server User's Guide

U25339-J-Z126-1-7600 85
Standard processing in SVP mode IPL in PROGRAM LOAD FRAME: DETAIL-1
In this example, the PROGRAM LOAD FRAME: DETAIL-1 screen is displayed:
Figure 42: PROGRAM LOAD FRAME: DETAIL-1 screen
LOAD FUNCTION => Enter 3 for dialog startup.
IPL DEVICE => Enter 3.
UNIT ADDRESS => Enter the device address of the load device.
In this example, the previous IPL was executed
successfully from the current device with device
address A108. Thus the desired address is already
in the UNIT ADDRESS field. It was also entered in the
CURRENT GROUP field by the SVP. Entering a 2 in the
IPL DEVICE field loads the operating system from
the desired device.
PARMS => Enter 1 in the first position of the field to load
VM2000.
MT CONTROL => 1 is preset. This parameter is only important for
loading from tape.
----- PROGRAM LOAD FRAME: DETAIL-1 ----- E02L01F
-LOAD FUNCTION- -IPL DEVICE-
==> 3 ==> 3
*1 START AUTO *1 PRESET GROUP ------------------+
*2 START FAST >*2 CURRENT GROUP --------+ |
*3 START DIAL *3 UNIT ADDRESS -+ + +
*4 START A108 A108 0108
*5 SYSTEM DUMP XXXX XXXX
*6 LOAD CLEAR -----+ XXXX XXXX
*7 LOAD NON CLEAR -+ XXXX XXXX
|
+MT CONTROL- --- DETAIL-2 STATUS ---
PARMS=> 1 ==> 1 VM MODE : NATIVE
>*1 NL EXA MODE : ENABLE
*2 SL IPL EXEC : ENABLE
*3 NL-REWIND
*4 SL-REWIND *ENTER EXECUTE
*PF3 GO TO BASIC FRAME
*PF9 GO TO DETAIL-2
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST