- Fujitsu Siemens Server User's Guide

82 U25339-J-Z126-1-7600

PROGRAM LOAD FRAME PRESET1 Standard processing in SVP mode

The AUXILIARY FRAME: LOAD PRESET1 screen is displayed:

Figure 40: AUXILIARY FRAME : LOAD PRESET1 screen

You can reach this screen directly from the MODE SELECTION FRAME by

entering the frame code AU5 in the FUNCTION=> ﬁeld or the command FR AU5 in

line 24 and pressing .

START MODE => Enter 1 for automatic start of the BS2000.

IPL DEVICE

PRESET GROUP A unit address from which the operating system is

loaded (IPL) must be entered in the input ﬁeld for

PRESET GROUP. A maximum of three further

addresses can be entered.

Entry in our example: 0108.

POWER ON IPL => Enter 1 for automatic IPL after POWER ON.

INITIAL FRAME => Enter 2 for a detailed display of the LOAD FRAME.

Catalog parameters

Ê Press the key.

The values entered are saved and thus made known to the SVP. These settings are

accessed for each IPL.

----- AUXILIARY FRAME: LOAD PRESET1 ----- E02L01F

-START MODE- -IPL DEVICE-

==> 1

*1 START AUTO 1 PRESET GROUP -----------------+

*2 START FAST 2 CURRENT GROUP --------+ |

>3 START DIAL 3 UNIT ADDRESS -+ + +

*4 START A108 A108 0108

XXXX XXXX

-POWER ON IPL-

==> 1

*1 ENABLE

>2 DISABLE

-INITIAL FRAME-

==> 2

*1 LOAD FRAME(BASIC) *PF12 CATALOG

>2 LOAD FRAME(DETAIL) *PF9 GO TO LOAD PRESET-2

CL-0 CPU-0 CHP-0 RUN

FLAG CODE = F6C0C100 00000F00

LTG TAST

ENTER

P12