- Fujitsu Siemens Server User's Guide

60 U25339-J-Z126-1-7600
User frames Standard processing in SVP mode
FACILITY => Possible displays of memory areas with various addres-
ses:
L LOGICAL logical storage address
R REAL real storage address
P P-VIRTUAL primary virtual storage address
S S-VIRTUAL secondary virtual storage address
ABS absolute address
KEY memory protect key
V A-VIRTUAL address areas virtual address
I H-VIRTUAL basic address area´s virtual address
SS SS-REAL SSU real address
SV SS-VRTL SSU virtual address
ADRS => Memory address
XXXX address area larger than 32 bits (not yet used)
XXXXXXXX 32-bit address
Special key functions
When you press this key, the following subframe is displayed:
Figure 23: ALTER/DISPLAY FRAME screen
You can use this frame to change and display the contents of important CPU registers. It is
a requirement that the selected CPU ( key) is stopped beforehand (see “(ML) MODE
SELECTION FRAME” on page 47).
P9
----- ALTER/DISPLAY FRAME ---- E02L01F
FUNCTION =>
*A ALTER
*D DISPLAY
FACILITY =>
-- REGISTER --
*GR *PSW
*CR *FCR
*FPR *PRX
*AR
*XCR *GSR
*EX EPRX
ADRS=>
=>
*PF9 CHANGE
FACILITY
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST
P16