- Fujitsu Siemens Server User's Guide

58 U25339-J-Z126-1-7600
User frames Standard processing in SVP mode
The following table shows the additional entries required for each of the three main
functions in other input fields:
RATE CONTROL => Defines program operation
1 PROCESS continual program operation
2 I-STEP step-by-step command execution
ADRS TYPE => Entry for address compare stop:
entry under ADRS SET is
1 ABSOLUTE an absolute address
2 LOGICAL a logical address
ADRS COMP SELECT => Address compare stop if compare stop address is same as
1 ANY any address
2 OPERAND FETCH(OFETCH) operand read address
3 OPERAND(OSTORE) operands write address
4 INSTRUCTION ADRS(IA) instruction address
5 IA & OFETCH instruction and operand read address
6 OFETCH & OSTORE operand read and write address
UNIT ADRS => Device address for firmware dump
ADRS SET => Compare stop address
XXXX Address area larger than 32 bits (not yet used)
XXXXXXXX 32-bit address
Input field
Function RATE
CONTROL
UNIT
ADRS
ADRS
TYPE
ADRS
COMP
SELECT
ADRS
SET
ADRS
COMP
MODE
1 RATE CONTROL o x x x x x
2 ADRS COMP STOP x x o o o o
3 FIRM DUMP x o x x x x
o: entry required
x: entry not required