- Fujitsu Siemens Server User's Guide

U25339-J-Z126-1-7600 55
Standard processing in SVP mode User frames
Special key functions
Sets operating mode. If a loading function has previously been stored in PROGRAM
LOAD FRAME: DETAIL-1 with the key, an IPL with the set parameters is
executed.
Switches to PROGRAM LOAD FRAME: BASIC (page 50)
Switches to PROGRAM LOAD FRAME: DETAIL-1 (page 51)
With the exception of the load function, the parameters entered in the subframes are
retained when switching between DETAIL-1 and DETAIL-2-FRAME with the key.
6.4.3 (ST) STATUS DISPLAY FRAME: CLUSTER
Figure 19: STATUS DISPLAY FRAME: CLUSTER screen
This frame displays information on the current status of the S130 and its individual compo-
nents (Power on/off, online/offline, normal/maintenance state etc.). Unmounted compo-
nents are not displayed. The memory size, operating system mode (BS2000 or VM2000),
and availability of the SKP (FTOPS2 ENABLE) are important displays.
Special key functions
Switches to the SSU FRAME (see next page)
ENTER
P9
P3
P9
P9
----- STATUS DISPLAY FRAME: CLUSTER ----- E02L01F
CPU0 (#0) ONL RUN CHBP0 PON
CPU1 (#1) ONL RUN
MSU0 ONL
MSU1 ONL
SPC
SCI
SVP
SYS PON
MCU0
CHP0 ONL
CHP2 ONL
SYSTEM INFORMATION
MEMORY 3 GB
MODE EXA
FTOPS2 ENABLE
*PF8 SSU FRAME
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST
P8