Manual

ManualsBrandsFujitsu Siemens Computers ManualsMonitors5110 FA

A26361-K872-Z100-1-5E19 English

Contents

Introduction........................................................................................................................................1

Notational conventions ..............................................................................................................2

Important notes .................................................................................................................................2

Safety........................................................................................................................................2

Cleaning notes...........................................................................................................................3

Transport notes .........................................................................................................................3

Manufacturer’s notes.................................................................................................................4

FCC Class B Compliance Statement.........................................................................................4

Declaration of Conformity ..........................................................................................................5

Important note on power cable ..................................................................................................5

Disposal and recycling...............................................................................................................6

Checking the contents of the consignment ........................................................................................6

Installing an ergonomic video workstation .........................................................................................7

Connecting the monitor......................................................................................................................8

Connecting cables to the monitor ..............................................................................................8

Connecting cables to the computer............................................................................................9

Operation of the monitor....................................................................................................................9

Adjusting rake and rotation ........................................................................................................9

Switching the monitor on/off ....................................................................................................10

Notes on power management..................................................................................................11

Changing the monitor settings .................................................................................................11

Notes on ergonomic colour adjustment............................................................................................17

Removing the monitor base.............................................................................................................18

Technical data.................................................................................................................................19

VESA-DDC-compatible VGA interface.....................................................................................20

Preset operating modes...........................................................................................................20

Pin assignment D-SUB............................................................................................................21

Monitor port DVI-D...................................................................................................................22

Trouble shooting..............................................................................................................................22

Summary of content (25 pages)

PAGE 1
Contents Introduction........................................................................................................................................1 Notational conventions ..............................................................................................................2 Important notes .................................................................................................................................2 Safety ................................................................
PAGE 2
PAGE 3
Introduction Your new LCD (Liquid Crystal Display) monitor 5110 FA offers numerous features and functions, for example: • • • • • • • • • • • • • • • • TFT display (Thin Film Transistor; active matrix) minimal space requirements thanks to slim casing optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) high degree of brightness and good contrast high resolution (1600x1200) for displaying the information content of a conventional
PAGE 4
Colour monitor 5110 FA Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. ! i Ê Supplementary information, remarks, and tips follow this symbol. Text which follows this symbol describes activities that must be performed in the order shown. "Quotation marks" indicate names of chapters or terms.
PAGE 5
Colour monitor 5110 FA • • • • • • • • • The ON/OFF switch does not disconnect the device from the mains voltage. To completely disconnect the mains voltage, remove the power plug from the socket. Lay all cables so that nobody can stand on them or trip over them. When attaching the device, observe the relevant notes in the "Connecting the monitor" chapter. No data transmission cable should be connected or disconnected during a thunderstorm. Please ensure that no objects (e.g. necklaces, paperclips etc.
PAGE 6
Colour monitor 5110 FA Manufacturer’s notes Energy Star The Fujitsu Siemens LCD colour monitor 5110 FA is designed to conserve electricity by dropping to less than 3 W when it goes into standby, suspend and OFF mode. With this new power management the 5110 FA qualifies for the U.S. Environmental Protection Agency's (EPA) Energy Star Computers award. The EPA estimates that computer equipment uses 5% percent of all business electricity and that this is growing rapidly.
PAGE 7
Colour monitor 5110 FA Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Product name: Colour LCD Monitor Trade name: Fujitsu Siemens Computers Inc.
PAGE 8
Colour monitor 5110 FA Disposal and recycling This device has been manufactured to the highest possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The device may be taken back after use to be recycled, provided that it is returned in a condition that is the result of normal use. Any components not reclaimed will be disposed of in an environmentally acceptable manner.
PAGE 9
Colour monitor 5110 FA Installing an ergonomic video workstation Window Before you set up your equipment, you should select a suitable position for working at the monitor. Please observe the following advice when installing a video workstation. edge of desk permissible reaching sector 600 mm Avoid direct and reflected glare. Avoid glare from electric lighting. Position the keyboard where it is easiest to reach. preferable viewing sector 0° approx.
PAGE 10
Colour monitor 5110 FA Connecting the monitor ! Observe the "Safety" in the "Important notes" chapter in this operating manual. CE conformance and optimum picture quality are guaranteed only if you use the data cable supplied. Do not cover the ventilation openings of the monitor. The computer power plug must be pulled out! Ê Be sure that the monitor and the computer are switched off. Connecting cables to the monitor The monitor ports are protected by a cover. Ê Remove the cover.
PAGE 11
Colour monitor 5110 FA i If you want to use the data cable with DVI-D connector or if you want to connect the monitor to a second computer, proceed as follows: Ê Connect the DVI-D connector of the data cable to the DVI-D connector on the monitor (3) and secure the plug-in connection by tightening the safety screws. Data cables with DVI-D connectors are available from specialised dealers.
PAGE 12
Colour monitor 5110 FA Switching the monitor on/off A B 2 1 1 = Power indicator 2 = Power button The ON/OFF switch (2) is used for switching the monitor on and off. The power indicator (1) can have the following states: The power indicator glows green. The monitor is switched on and operating. The power indicator glows amber. The monitor is in the energy-saving mode. The power indicator is dark. The monitor is switched off.
PAGE 13
Colour monitor 5110 FA Notes on power management If your computer is equipped with power management, the monitor can support this function fully. Here the monitor does not distinguish between the individual energy-saving modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect.
PAGE 14
Colour monitor 5110 FA Monitor settings with the buttons of the control panel B A 1 3 2 1 = Headphones port 2 = Buttons for the OSD menu (On-Screen-Display) 4 3 = Power indicator 4 = Power button Use the buttons of the control panel to make the following monitor settings directly while the OSD menu is switched off. Adjusting contrast, brightness and volume Press the 6 or 5button to activate the setting window for contrast, brightness and volume.
PAGE 15
Colour monitor 5110 FA To set the OSD menu, perform the following steps: Ê Briefly press the A button to activate the OSD menu. The main menu appears on the screen with icons for the setting functions. C ON T R AS T / B R I GH T N E S S I M AGE AD J U S T C OL O R AD J U S T A D VA N C E D M E N U AU D IO M E N U S E T U P ME NU M E M OR Y R E CAL L A : E XIT The last icon set is marked (in this case CONTRAST / BRIGHTNESS). At the bottom of the OSD menu each button's function is displayed.
PAGE 16
Colour monitor 5110 FA Adjusting the brightness and contrast Calling the CONTRAST / BRIGHTNESS setting window Setting the contrast of the display (CONTRAST) This function allows you to modify the contrast of bright colour tones. Setting the brightness of the display (BRIGHTNESS) This function allows you to change the brightness of the background lighting. i If the contrast is set too high, bright surfaces can no longer be distinguished from very bright surfaces.
PAGE 17
Colour monitor 5110 FA Setting colour temperature and colours Calling the COLOR ADJUST setting window Selecting the colour temperature (COLOR TEMPERATURE) The "warmth" of the screen colours is set using the colour temperature. The colour temperature is measured in K (= Kelvin). You can select from 9300 K, 6500 K, 5400 K and 5000 K.
PAGE 18
Colour monitor 5110 FA Setting functions in the "AUDIO MENU" menu Calling AUDIO MENU setting window Setting the volume for the output terminal (VOLUME) Muting the output terminal (MUTE) Setting functions in the "SETUP MENU" menu Calling SETUP MENU setting window Selecting input signal (INPUT SELECT) If the monitor is operated with analogue or digital signals, you can switch over between the analogue and the digital mode with this function (depending on the graphics card you use).
PAGE 19
Colour monitor 5110 FA Notes on ergonomic colour adjustment If you select colours for the display in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry.
PAGE 20
Colour monitor 5110 FA Removing the monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base: Ê Lay the monitor on its face on a soft surface. ! The monitor surface is susceptible to scratching! 2 DIGITAL ANALOG Fujitsu Siemens Computers Bgm. -Ulrich-Str. 1 00 86199 Augs burg / Germa ny Color Monitor 5110 FA S26361-K872-V150 AUDIO POWER This device comp lies wit h Part 15 of the FC C Rul es.
PAGE 21
Colour monitor 5110 FA Technical data Dimensions and weight (LCD monitor) Visible diagonals: 51 cm Dot pitch: 0,255 mm Screen size: 408 mm x 306 mm Maximal resolution: 1600 x 1200 Dimensions (W x H x D): Monitor incl. monitor base: with box: 482 mm x 458 mm x 200 mm 575 mm x 260 mm x 555 mm Monitor incl. monitor base: with box: 10.0 kg 13 kg Weight: Accessories: Power cable (1.8 m) Data cable (D-SUB) (1.8 m) Data cable (DVI-D) (1.
PAGE 22
Colour monitor 5110 FA Environmental conditions Environment class 3K2, IEC 721 Rated range of operation: Humidity: 15 °C .... 35 °C 20 % .... 85 % Limit range of operation: Humidity: 5 °C .... 35 °C 20 % .... 85 % Condensation must be avoided. VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer.
PAGE 23
Colour monitor 5110 FA In the HDTV format (1280 x 720/60 Hz; 1920 x 1080/60 Hz interlaced) the following functions are not supported by this monitor: Auto adjustment, Position, Image Lock and Zoom/Pan. From a technical point of view, it is preferable to set a refresh rate of above 60°Hz on an LCD monitor with a TFT display. i Pin assignment D-SUB 5 1 6 10 15 11 Pin Meaning Pin Meaning 1 Video input red 9 no pin 2 Video input green 10 Sync.
PAGE 24
Colour monitor 5110 FA Monitor port DVI-D C5 C1 C2 1 9 17 Pin Meaning C3 C4 Pin Meaning Pin Meaning 1 TMDS Data2- 11 TMDS Data 1/3 Shield 21 NC 2 TMDS Data2+ 12 NC 22 TMDS Clock Shield 3 TMDS Data 2/4 Shield 13 NC 23 TMDS Clock- 4 NC 14 +5V Power 24 TMDS Clock+ 5 NC 15 Ground 6 DDC Clock 16 Hot Plug Detect C1 Analogue Red 7 DDC Data 17 TMDS Data0- C2 Analogue Green 8 NC 18 TMDS Data0+ C3 Analogue Blue 9 TMDS Data1- 19 TMDS Data 0/5 Shield C4 Anal
PAGE 25
Colour monitor 5110 FA No display (power indicator lights) Ê Ê Check whether the computer is switched on. Ê Ê Press any key on the computer keyboard – the computer may be in energy saving mode. Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. Alter the brightness and/or contrast until you get a picture. Picture disturbances (vertical and horizontal lines, picture noise) Ê Perform auto-adjustment (AUTO TUNE).