Operating Manual Monitor 4612 FA

Color monitor 4612 FA

A26361-K628-Z100-1-5E19 English - 9

Connecting cables to the monitor

The monitor ports are protected by a cover.

1 = Cover lever

2 = D-SUB connector

3 = DVI connector

4 = Power connector

Ê Press the cover lever (1) to the left and remove the cover.

The data cables provided have a plug for the DVI connection socket on the monitor and a 15-pin D-

SUB plug or a DVI plug for the connection on the computer.

Ê Select the suitable data cable for your computer.

Digital graphics card with DVI interface: DVI connector

Graphics card with VGA interface: D-SUB connecto

Information on the computer connections and interfaces is contained in the operating manual for

your computer.

Ê Connect the DVI connector of the data cable to the DVI connector on the monitor (3) and

secure the plug-in connection by tightening the safety screws.

If instead of the data cables supplied you want to use a data cable with two 15-pin D-SUB

connectors or if you want to connect the monitor to a second computer, proceed as

follows:

Ê Connect the D-SUB connector of the data cable to the appropriate D-SUB connector

(2) and secure the plug-in connection by tightening the safety screws.

Data cables with two 15-pin D-SUB connectors are available from specialized dealers.

After you have switched on the monitor you must select the desired input using the DVI/D-

SUB button. A message to this effect appears on screen.

Ê Connect the connector of the power cable to the power connector (4) of the monitor and ensure

a secure connection.

Ê Mount the cover over the connections again.