User Manual

Color monitor 19T2
A26361-K616-Z100-2-5E19 English - 15
Resetting all settings for the current input signal
Ê Press - with the OSD menu hidden - the factory settings button .
All settings for the current input signal are reset.
i
With this method those settings are not reset which are not influenced by a change in the
input signal (language and position of the OSD menu, color setting, locking of the buttons
for monitor adjustment).
Resetting all settings for all input signals
Ê Press and hold down the factory settings button - with the OSD menu hidden - for at
least 2 seconds.
All settings including brightness and contrast are reset to the factory values.
Notes on ergonomic color adjustment
If you select colors for the display in your application programs, take note of the information below.
The primary colors blue and red on a dark background do not produce the minimum required
contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colors for characters and background and giving the primary colors full
modulation, you can obtain very suitable color combinations (see the following table):
Background Characters
black white purple blue cyan green yellow red
black + + - + + + -
white + + + - - - +
purple + + -----
blue - + - + - + -
cyan + - - + - - -
green + - - + - - -
yellow + - + + - - +
red -+----+
+ Color combination very suitable
- Color combination not suitable because color locations are too close together, thin characters
are not identifiable or rigorous focusing is demanded of the human eye.