9T2 Bildschirm / Moniteur / Monitor / Skärm / Beeldscherm BETRIEBSANLEITUNG OPERATING MANUAL
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an: • unsere Hotline: Mo-Fr: 9 - 18 Uhr Sa: 9 - 14 Uhr Tel.: ++49 (0) 180 3777 000 • einen unserer Servicepartner • Ihren zuständigen Vertriebspartner • Ihre Verkaufsstelle Die Adressen Ihrer Servicepartner finden Sie im Garantieheft oder im Service-Adressenheft. Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: http://www.fujitsu-siemens.com Is there ... ...
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.
Deutsch English 19T2 Farbbildschirm Color monitor Moniteur couleur Monitor de color Monitor a colori Färgskärm Kleurenbeeldscherm Français Español Italiano Svenska Nederlands TCO'99 Betriebsanleitung Operating Manual Ausgabe Juli 2000 July 2000 edition
VESA, DDC und DPMS sind eingetragene Warenzeichen der Video Electronics Standards Association. Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung. Liefermöglichkeiten und technische Änderungen vorbehalten.
Contents Introduction........................................................................................................................................1 Notational conventions ..............................................................................................................1 Important notes .................................................................................................................................2 Safety ................................................................
Introduction Your new 19T2 monitor supplies you with a high-quality color image with high resolution and ergonomic refresh rates. It possesses a whole range of useful features and functions, e. g.: • • 19" (46 cm) high-resolution Trinitron CRT (0.24 - 0.
Color monitor 19T2 Important notes ! In this chapter you will find information regarding safety which is essential to take note of with your monitor. The chapter also contains information on the licenses issued for your equipment. Safety This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. If you have any questions, contact your sales outlet or our customer service center.
Color monitor 19T2 • • You may set only those resolutions and refresh rates specified in the "Technical data" chapter. Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or customer service center. Keep this Operating Manual together with your device. If you pass on the device to third parties, you should include this manual. Cleaning note19T2 • • • • • • Always pull out the power plug before you clean the monitor.
Color monitor 19T2 Note on X-ray radiation This device complies with the German X-ray regulations (Röntgenverordnung - RöV). The local dosage emitted is less than 1 µSv/h (micro-Sievert per hour) at a distance of 0.1m. Important note on power cable To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set. • • • • The female/male receptacles of the cord set must meet CEE-22 requirements.
Color monitor 19T2 Disposal and recycling This device has been manufactured to the greatest possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The CRT contains no cadmium The device is taken back after use, to be recycled, provided that it is returned in a condition that is the result of normal use. Any components not reclaimed will be disposed of in an environmentally acceptable manner.
Color monitor 19T2 Installing an ergonomic video workstation Window Before you set up your equipment you should select a suitable position for working at the monitor. Please observe the following advices when installing a video workstation. edge of desk permissible reaching sector 600 mm Avoid direct and reflected glare. Avoid glare from electric lighting. Position the keyboard where it is easiest to reach. preferable viewing sector 0° permissible reaching sector 600 mm approx.
Color monitor 19T2 1 Ê 2 1 = Power connector 2 = Data cable Be sure that the monitor and the system unit are switched off. ! Ê The system unit's power plug must be pulled out! Connect the connector of the data cable to the (active) monitor port on the system unit and secure the plug-in connection by tightening the safety screws.
Color monitor 19T2 Operation of the monitor 2 1 = Control panel with buttons for screen setting 2 = Power indicator 3 = ON/OFF switch 3 1 Switching the monitor on Ê Press the ON/OFF switch (3). The power indicator (2) lights up green when the system unit is turned on. i If your PC has a power management function (energy-saving mode), you should read the "Notes on power management" of the monitor in this chapter.
Color monitor 19T2 If your PC detects inactivity (no input) it sends an appropriate signal to the monitor to reduce the power consumption. The power indicator of the monitor changes color to indicate the status change. If there is still no input, power consumption is further reduced (OFF mode). Once an input is made at the PC the screen contents are redrawn and full power is restored. The length of the individual stages is determined by the power management system of the PC.
Color monitor 19T2 Operating the OSD menu To set the OSD menu, perform the following steps: Ê Briefly press the Menu button to activate the OSD menu. The main menu appears on the screen with icons for the setting functions. Ê MENU OK EXIT SIZE/CENTER GEOMETRY COLOR CONVERGENCE LANGUAGE OPTION HELP A ? Select the desired symbol with the arrow buttons and , e. g. GEOMETRY. (If you wish to exit the OSD menu, select EXIT.) The selected symbol has a colored marking.
Color monitor 19T2 Setting the brightness of the background Setting the contrast between the foreground and background Setting picture position and size (SIZE/CENTER) The set values for the picture position and size are only saved for the current input signal.
Color monitor 19T2 Trapezoid distortion (KEYSTONE): Making the bottom edge narrower and the top edge wider or making the top edge narrower and the bottom edge wider Parallelogram distortion (KEY BALANCE): Reducing the angle of the left and right sides Setting color temperature and colors (COLOR) The "warmth" of the screen colors is set using the color temperature. The monitor has two fixed color temperatures (K = Kelvin). In addition, a user-defined fine calibration of the colors can also be carried out.
Color monitor 19T2 Setting language for the OSD menu (LANGUAGE) A Setting language for the OSD menu You can choose from English (default setting), German, French, Spanish, Italian, Swedish, Dutch, Russian and Japanese. Setting monitor options (OPTION) You can degauss the monitor in the settings window OPTION, you can set the Moiré correction, change the OSD position, lock/release the buttons for monitor settings and restore original monitor colors.
Color monitor 19T2 Restore original monitor colors (COLOR RETURN) After a number of years of operation the color brightness of your monitor may decrease slowly. With this function you can reset the monitor colors to manufacturer's default values. (Due to the natural aging process this function may no longer work after a certain period of time.) Prior to being able to use this function, the monitor must have been in standard operation for at least 30 minutes (power indicator is green).
Color monitor 19T2 Resetting all settings for the current input signal Ê Press - with the OSD menu hidden - the factory settings button . All settings for the current input signal are reset. i With this method those settings are not reset which are not influenced by a change in the input signal (language and position of the OSD menu, color setting, locking of the buttons for monitor adjustment).
Color monitor 19T2 Technical data Dimensions and weight CRT: 46 cm (19") Visible diagonals: 46 cm Dot pitch: 0.24 - 0.25 mm (slot mask) Maximal resolution: 1600 x 1200 pixels Preset display area: 352 mm x 264 mm Dimensions (W x H x D): 449 mm x 463 mm x 463 mm Weight: 26 kg Accessories: Power cable (1.8 m) Storable display modes: 25 (10 of which are preset) Electrical data Video: Synchronization: analog, positive, 0.7 Vpp, 75 Ohm Separate Sync. TTL Composite Sync. TTL/ Sync.
Color monitor 19T2 VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the PC. If your PC is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings.
Color monitor 19T2 Pin assignment D-SUB (15-pin) 5 1 6 10 15 11 Pin Meaning Pin Meaning 1 Video input red 9 +5V 2 Video input green / Sync. on green 10 Logic ground 3 Video input blue 11 Monitor ground 4 Monitor ground 12 Bi-directional Data (SDA) 5 DDC ground 13 H. sync 6 Red video ground 14 V.
Color monitor 19T2 Error handling Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another PC. Self-diagnosis The monitor is equipped with a self-diagnosis function. If the monitor recognizes a fault, the screen display remains dark and the power indicator glows green or flashes orange. The power indicator glows green Ê Ê Switch the connected PC off.
Color monitor 19T2 Two fine horizontal lines (wires) are visible i Your monitor is equipped with a Trinitron picture tube, which enables more light to reach the screen with a vertical slot mask, and therefore produces more intense colors. The thin lines visible with a white background are shadows of the damper wires, which stabilize the vertical slot mask. They are characteristic of picture tubes with a vertical slot mask. There is no malfunction.
Color monitor 19T2 A humming noise is heard after switch-on The monitor is degaussed every time you switch it on. This produces the humming noise. There is no malfunction. Error messages on the screen MONITOR IS WORKING OUT OF THE SCAN RANGE The input signal (horizontal frequency and refresh rate) does not correspond to the technical monitor data. Ê Adjust the video frequency range using the PC software (see documentation for your PC or your screen controller/graphics card).
