User's Guide
Table Of Contents
- User Guide
- Contents
- Preface
- 1 About this Guide
- 2 Overview
- 3 RU Hardware Feature
- 3.1 System Configuration
- 3.2 RU Specifications
- 3.3 Environment Specifications
- 3.4 RU Downlink/Uplink Default Parameters
- 3.5 Antenna Configuration
- 3.6 Carrier Configuration
- 3.7 Block Diagram
- 3.8 External Interface
- 3.9 TX Control Function
- 3.10 Performance Requirement
- 3.11 Mechanical Design and Other Options
- 4 Ordering Information
- 5 Installation
- 6 Operations
- 7 Maintenance and Trouble Clearing
- 8 Removal
- A References
- B ZTP Overview
- C Optical Connector Cleaning
- D Glossary
- Index
M 8 Eye Bolt
M 8 Hex Bolt
Split Washer
Split Washer
Flat Washer
Flat Washer
NOTE: Use torque value of 9.28 N/ m
FNC001596_Rev_01
Figure 17
Installing L-Brackets and Eye Bolts
Continue with the next task.
5.6.3
Attach RU Mounting Adapter Plate
This procedure describes how to attach the mounting adapter plate to the RU.
Prerequisite:
■ Loctite LB 8012 or equivalent lubricant applied to all bolts
Recommended Tools:
■ 1/ 2, 7/ 16, and 11/ 16 sockets
■ 5/ 8 wrench
Installation
RU Installation
84
Release 1.0 · Issue 1, March 2021
Fujitsu and Fujitsu Customer Use Only