User's Guide
Table Of Contents
- User Guide
- Contents
- Preface
- 1 About this Guide
- 2 Overview
- 3 RU Hardware Feature
- 3.1 System Configuration
- 3.2 RU Specifications
- 3.3 Environment Specifications
- 3.4 RU Downlink/Uplink Default Parameters
- 3.5 Antenna Configuration
- 3.6 Carrier Configuration
- 3.7 Block Diagram
- 3.8 External Interface
- 3.9 TX Control Function
- 3.10 Performance Requirement
- 3.11 Mechanical Design and Other Options
- 4 Ordering Information
- 5 Installation
- 6 Operations
- 7 Maintenance and Trouble Clearing
- 8 Removal
- A References
- B ZTP Overview
- C Optical Connector Cleaning
- D Glossary
- Index
Important Warnings and Cautions
Observe all warnings in the text or on equipment labels regarding high-voltage or high-temperature conditions. The following warnings
and figures apply to most Fujitsu products.
RF Safety
RADIO FREQUENCY ENVIRONM ENT
AREA, RADIO FREQUENCY FIELDS M AY
EXCEED THE FCC GENERAL HUM AN
EXPOSURE LIM IT .
Personnel proceeding beyond this point must
obey all posted signs, site guidelines, and
Federal Regulations for working in radio
frequency environments in accordance with
Federal Regulations on frequency emissions.
BEYOND THIS POINT:
FNC001587_Rev_01
Locations where RF field levels may exceed the FCC M aximum Permissible Exposure limits for General Population/ Uncontrolled exposure
but are definitely below the FCC M PE limits for Occupational/ Controlled exposure.
Tout site ou l’intensité des fréquences radio (RF) peuvent excéder l’intensité maximale générale permise par le FCC pour une exposition
non contrôlée et simultanément être inferieure a la limite maximale d’exposition permise (MPE) du FCC en regard de l’exposition
professionnelle contrôlée.
BEYOND THIS POINT:
RADIO FREQUENCY FIELDS AT THIS
SITE M AY EXCEED THE FCC RULES
FOR HUM AN EXPOSURE.
For your safety, obey all posted signs and site
guidelines for working in radio frequency
environments in accordance with Federal
Regulations on frequency emissions.
FNC001588_Rev_01
Locations where RF field levels in some areas of the site may exceed the FCC M PE limits for Occupational/ Controlled exposure.
Tout site, en tout ou en partie, où l’intensité des fréquences radio (RF) peuvent excéder la limite maximale d’exposition permise (M PE) du
FCC en regard de l’exposition professionnelle contrôlée.