User's Guide
Table Of Contents
- User Guide
- Contents
- Preface
- 1 About this Guide
- 2 Overview
- 3 RU Hardware Feature
- 3.1 System Configuration
- 3.2 RU Specifications
- 3.3 Environment Specifications
- 3.4 RU Downlink/Uplink Default Parameters
- 3.5 Antenna Configuration
- 3.6 Carrier Configuration
- 3.7 Block Diagram
- 3.8 External Interface
- 3.9 TX Control Function
- 3.10 Performance Requirement
- 3.11 Mechanical Design and Other Options
- 4 Ordering Information
- 5 Installation
- 6 Operations
- 7 Maintenance and Trouble Clearing
- 8 Removal
- A References
- B ZTP Overview
- C Optical Connector Cleaning
- D Glossary
- Index
5
Installation
In this chapter:
5.1 Unpack
5.2 RU Inventory
5.3 M ounting
5.4 Installation Precautions
5.5 Returning of Defective Equipment
5.6 RU Installation
5.7 Cable Installation
The following sections describe how to attach the RU to a wall or pole using the mounting kit.
Caution: Use care when handling the RU, as it is heavy. Fujitsu recommends installing the RU on a two
person team to avoid damage to the unit or injury to the user.
Caution: If the RU is to be installed at high location, Fujitsu recommends using lifting equipment to hoist
the RU by a pair of eye bolts mounted on the RU.
Installation
70
Release 1.0 ยท Issue 1, March 2021
Fujitsu and Fujitsu Customer Use Only