User's Guide
Table Of Contents
- User Guide
- Contents
- Preface
- 1 About this Guide
- 2 Overview
- 3 RU Hardware Feature
- 3.1 System Configuration
- 3.2 RU Specifications
- 3.3 Environment Specifications
- 3.4 RU Downlink/Uplink Default Parameters
- 3.5 Antenna Configuration
- 3.6 Carrier Configuration
- 3.7 Block Diagram
- 3.8 External Interface
- 3.9 TX Control Function
- 3.10 Performance Requirement
- 3.11 Mechanical Design and Other Options
- 4 Ordering Information
- 5 Installation
- 6 Operations
- 7 Maintenance and Trouble Clearing
- 8 Removal
- A References
- B ZTP Overview
- C Optical Connector Cleaning
- D Glossary
- Index
4.3
Accessories
Attention: The RU requires the following customer-supplied accessories to operate.
Unit Name Description
DC Power Cable Connects to RU DC power connector
RF Cable Connects from RU antenna port to antenna
AISG Cable Connects to the RU RET port
Optical Cable Connects from the RU eCPRI Optical port to the DU
Optics, SFP 10G SFP
Antenna Bracket Allows the antenna to mount to RU
Antenna Transmits and receives radio signals
Ordering Information
Accessories
69
Release 1.0 ยท Issue 1, March 2021
Fujitsu and Fujitsu Customer Use Only