User's Guide

In-channel Selectivity
Table 24
General (SCS=15kHz)
BS channel
bandwidth [M Hz]
Reference
measurement
channel
W anted signal
mean pow er [dBm]
Interfering signal
mean pow er [dBm]
NF [dB]
Type of interfering
signal
5 G-FR1-A1-7 –100.6 –81.4 NF
REF
+ 3.3 DFT-s-OFDM NR
signal,
15 kHz SCS, 10 RBs
10 G-FR1-A1-1 –98.7 –77.4 NF
REF
+ 3 DFT-s-OFDM NR
signal,
15 kHz SCS, 25 RBs
15 G-FR1-A1-1 –98.7 –77.4 NF
REF
+ 3 DFT-s-OFDM NR
signal,
15 kHz SCS, 25 RBs
20 G-FR1-A1-1 –98.7 –77.4 NF
REF
+ 3 DFT-s-OFDM NR
signal,
15 kHz SCS, 25 RBs
Note: Wanted and interfering signal are placed adjacently around Fc, where the Fc is defined for BS channel
bandwidth of the wanted signal according to the table 5.4.2.2-1. The aggregated wanted and interferer signal
shall be centred in the BS channel bandwidth of the wanted signal.
Table 25
In-channel Selectivity for NB-IoT Operation
BS channel
bandwidth [M Hz]
Reference
measurement
channel
W anted signal
mean pow er [dBm]
Interfering signal
mean pow er
(dBm) / BW Config
NF [dB]
Type of interfering
signal
5 FRC A14-1 in Annex
A.14 in
TS 36.104
-124.3 –81.4 NF
REF
+ 3 DFT-s-OFDM NR
signal,
15 kHz SCS, 10 RBs
10 FRC A14-1 in Annex
A.14 in
TS 36.104
–124.3 –77.4 NF
REF
+ 3 DFT-s-OFDM NR
signal,
15 kHz SCS, 25 RBs
15 FRC A14-1 in Annex
A.14 in
TS 36.104
–124.3 –77.4 NF
REF
+ 3 DFT-s-OFDM NR
signal,
15 kHz SCS, 25 RBs
20 FRC A14-1 in Annex
A.14 in
TS 36.104
–124.3 –77.4 NF
REF
+ 3 DFT-s-OFDM NR
signal,
15 kHz SCS, 25 RBs
RU Hardware Feature
Performance Requirement
61
Release 1.0 · Issue 1, March 2021
Fujitsu and Fujitsu Customer Use Only